DIY Wood Easter Bunnies Guarding the Easter Eggs Garden
The various wire eared Easter Bunny eggs I have seen on Pinterest are so cute I wanted to make some scrap wood wire ear Easter bunnies. A couple of years ago I shared a simple Easter centerpiece as part of my Easter home tour. It has two rabbits guarding a carrot garden.
I received lots of comments both online and at home, so this post is a twist on that theme. This year I instead of a carrot garden I made a much larger Easter egg garden guarded by the two DIY wood bunnies. The two DIY wood bunnies work well in this arrangement as they are unbreakable allowing little hands to help themselves to the homemade Easter eggs.
For my Easter rabbits, I used some more of the leftover 3/4″ plywood I made this other decorative Easter bunny from, but you can make them using 1 by 6″ lumber as well. The pattern is included, so let’s get going on the tutorial. The eggs in the garden are homemade, and I will share the recipe for the chocolate peanut butter eggs next week.
DIY Easter Bunny Craft with Wire Ears Tutorial
Supplies you will need for the DIY Wood Bunnies
Scrap wood, 3/4″ plywood or 1 by 6″ lumber.
Jigsaw or scroll saw
Pencil and carbon paper
White, blue, and soft pink acrylic paint and small brush
Fine tip sharpie pen
18 gauge paper covered stem wire, wire cutter, scotch tape
Pink sparkly cardstock (optional), glue
Preparing the Wood for DIY Bunny Craft
Print out the Bunny template, layer with carbon paper and transfer onto your lumber.
Cut out with a scroll saw or a jigsaw. I am excited as this is the first piece I cut out on my own. Its a really easy shape for newbies.
You want your drill bit to be a little bit larger than the stem wire. Once you have selected the bit drill
drill four holes in the top of your wood about where you want to place the ears.
Sand all the edges of the wood cut out smooth.
Paint the front and back of your cutout white, paint the outer edges in soft blue.
Use two coats of paint letting them dry between coats. While waiting for the paint to dry you can get started on the wire ears.
Making the Easter Bunny Wire Ears
Using the template for the face and ears, take a length of wire and shape it according to the pattern.
Cut your wire about 1/4 inch longer than the pattern shows. Repeat this for the other ear. Create a second set of ears an inch shorter than the first set.
Paint the inside portion of the ears with two coats of soft pink paint. Let dry, it takes less than half an hour.
Place the small arch of the ears between the large arch of the ear. Using small pieces of the transparent tape wrap the ends tightly together, use the wire cutters to cut off the ends of the tape. Repeat for the other ear.
Attach the bunnies ears after painting the face on.
Place the end of the ear into the holes on the top of the bunnies head. If you have difficulty fitting the wire into the hole, drill the hole a little bit larger or deeper. I did not glue my ears so they can be removed for storing. Also please note that the ears don’t need to be exact as long as they are proportionate to one another. The ears are bendable and fun to adjust for different emotions.
Transferring the Facial Features
Once your paint is dry cut out the shape of the head on both the pattern and the carbon a paper. This makes it easier to see where the facial features are. If you happen to make a mistake (I did) erase the carbon off and redo it. Place the carbon paper on top of the wood, cover with the template and trace out all the features (except the nose).
Transfer the nose using carbon paper on to the wrong side of your pink sparkly cardstock. I cut out a piece of sparkly cardstock, but you can paint it directly onto the bunny, use a scrap of wood or a button if you don’t have the cardstock paper.
Paint the eyes using a fine point sharpie pen. I enjoyed doing that part very much, it was like putting on eyeliner that worked really well the first time.
Using a Tombow pen in brown outline the lines under the nose, draw the mouth with dark pink.
To add the checks, make sure you have a small brush damp with water. Using a soft pink Tombow watercolour brush pens mark a circle for one cheek. Quickly soften the marking using the wet brush, making the blush larger and circular. Repeat for the second cheek.
Apply the nose to the face with wood glue.
Decide whether you want whiskers or not. If you choose to have whiskers, draw them on with a soft brown Tombow pen. For my bunnies I painted whiskers onto one bunny to make it more masculine.
For the other bunny, I added a quick little flower headpiece and skipped the whiskers.
The Little Flower Headpiece
This little headpiece is made using bits of one flower, using little bits of faux twigs, two tiny leave, and one flower. Start by selecting the pieces off of a flower. Wrap the branches into a little bow. Securing it with a tiny bit of florist wire. Pinch to hold the center.
Glue on two small leaves. and wrap with the wire. Trim the wire off.
Glue the flower on top of the leaves and then the arrangement onto the bunny.
Because the bottom of the bunnies are flat they were easy to place onto a platter.
Fill your platter with Easter grass and any kind of Easter trees you want to serve. Mine are homemade chocolate peanut butter eggs. I will share next week.
Wood bunnies are very fun to make, and almost free when you use scrap wood. I hope you like the idea of wood bunny crafts as much as I do. Here is another wood bunny craft that reminds me of a Mom and baby enjoying the early days of Spring.