DIY Wire Basket for Fall Decor

DIY Wire Basket  for Fall

Long baskets are very hard to find, I did find a pricey one online but as usual, my tastes cost more than my budget allows.  During the search, I learned that this style of DIY wire basket is called a clam basket or vegetable hog.

This DIY wire basket is very practical for gardeners as well, but for this year at least mine was made to hold birch branches on our too narrow fireplace hearth.

 

DIY wire basket for fall decorating.

 

You can easily adjust the size of your basket, by changing the cut out of the end pieces and the distance between the ends.   This one needed to be narrow to accommodate the moulding on the fireplace.

To make your own crab basket you will need:

1 by 6″ lumber or a small piece of  3/4 plywood for the two ends

2- 3-foot lengths of dowel

1″ by 2″ lumber 3 feet long

120 grit sandpaper

Paint or stain

Hardware cloth

Small wire

Wood glue and 2 screws

Small rope for the handle

Staple  gun

 

Make the Ends of the Wire Basket

Cut out two pieces of wood, one for each end using a jigsaw.   You can draw a template to the size you want then trace and cut out the wood.  Use the first piece as a template for the second piece to make sure they are identical.

 

Cutting the ends off a DIY wire basket frame for a clam basket.

 

Once they are cut drill two holes one in each top corner of the ends and one in the center. To make sure the holes align and don’t twist the doweling. Drill the holes in the first end piece.  Align and clamp the drilled piece on top of the second wood piece and using the top piece as your guide drill a hole through the bottom piece.

 

Drilling holes in the end of a DIY wire basket for fall decor.

Build the Basket

Cut the dowels to the length you like,  this one is cut at 32″.  Glue and then insert the dowels inside the holes in the end pieces.  Make sure that the ends are fitting squarely.

 

Adding doweling to a DIY wire basket or clam basket for fall.

 

To make the basket sturdy enough to hold wood and stand up nicely, we added a cross piece along the bottom using 1″ by 2″ lumber.  Measure the distance between the two ends (30.5″) and cut the 1″ by 2″ lumber to fit.  Insert the lumber between the two ends and attach with screws.

Fill in the holes with wood filler and sand the basket frame smooth.   Paint or stain as you like.  This basket was given two coats of white pickling stain.

 

DIY fall craft project for fall decorating.

Adding the Wire

Cut your hardware cloth four or five inches wider than you need. (35″ by 24″) .  Cut the wire larger than necessary so you have extra length to bend and adjust and bend and fit the hardware cloth inside the frame.  After the first cut,  snip any little edges with wire cutters.  You may want to use gloves, I got scratches without them.

Using a straight edge fold your wire over squarely.   Using a straight edge like a carpenters square or even leftover 1 by 2 lumber, fold the wire over the straight edge.  Then crimp by hand.

 

DIY wire basket tutorial, how to fold the top section of a wire basket. DIY wire baskets, DIY baskets, how to make wire basket, DIY storage baskets,

 

Place the hardware cloth inside the wooden frame.  Tie one edge to the doweling using small wire, then fit the rest of the wire into the frame,

 

Folding and fitting hardware cloth to a DIY wire basket frame

 

Once the wire is shaped, tie the second side to the doweling,  and attach with small wire.  Tuck the ends of the wire against the two ends as neatly as possible.  Be patient, but in the end, no one will see the folds.  Staple the wire into place with the staple gun.

 

How to make a DIY wire basket or clam basket for fall decor.

Add the Macrame

The macrame is done using only repetitive square knots.  It’s easy to do, but you can use a simple rope handle and wire on the dowels if you prefer.   You can tell in the above picture that the doweling look alright with the little wires symmetrically attached along its length.  I just chose to do the macrame to make it prettier and it very much depends on your final choice for the basket.

Cut four lengths of macrame cord 12 feet long.    Thread the four lengths through the center drilled hole.   Tie a knot and then a pretty bow on the outside of the basket.

 

DIY wire basket for fall decorating.

 

Tie square knots along the length of the cords until the handle is as long as you like.

How to Tie a Macrame Square Knot

First step of Macrame square knot

Second step of Macrame square knot

Steps three and four of Macrame square knot

Feed the other ends through the other end and tie.  Trim off the ends.

Covering the dowels.  I started with the handle for the readers who may be doing macrame for the first time so they have practice before doing the dowels.

This step is easy but requires patience.  Cut two lengths of the cord  9 feet long.

Thread one piece of cord through the hardware cloth and tie a knot and bow.  The dowel will act like the two center cords and you work the other two cords around the dowel doing square knots.  When you pass the cord underneath the doweling thread it through the hardware cloth. (Step 4 in the above picture)  Complete the square knots until the other end and the dowel is covered.  Repeat on the other side.

 

DIY fall basket with macrame handle.

 

Once done I turned the top of the square knots to the inside.

This diy wire basket looks more complicated than it is to make.  I love how it turned out, it’s white and frankly nicer than the $100 version I saw online.   It is my hope that I broke the tutorial down into manageable steps without overwhelming you on the length of the tutorial.

Leanna

 

DIY wire basket decorated for fall in neutral colours

4 thoughts on “DIY Wire Basket for Fall Decor

  1. I’ve never seen one of these before – I love your DIY version, especially with the pretty macrame details. Such a pretty way to store and display birch wood! Pinned 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *

CommentLuv badge

This site uses Akismet to reduce spam. Learn how your comment data is processed.