DIY Welcome Sign – Farmhouse Hens Decorate

DIY Wood Farmhouse Sign

It’s really exciting for me to share the latest Farmhouse Hens collaboration, each one of us is sharing a farmhouse style DIY wall art post.   I really look forward to seeing what the other Hens are creating and this month is especially exciting for me.

farmhouse kitchen, diy farmhouse decor, farmhouse style kitchen, modern farmhouse kitchen ideas.

Have you ever fallen in love with a particular craft or decor idea?   DIY artwork especially the phrase artwork is my favorite, not so much because I love getting covered with paint, but I cannot wait to have a new sign.

A large DIY welcome sign. This DIY wood sign is a large, farmhouse sign for the home. ;

This welcome sign is the largest art piece I have ever made with my cutting machine.  I am sharing how to create a larger sign and work with larger vinyl designs.


1/4 inch plywood sanded and smooth

1 by 2″ lumber

A cutting machine

Sticky vinyl and transfer paper

Espresso paint and white paint


Prepare the Wood

Cut the plywood to  the size you want this sign is 17 by 34 inches.       If your plywood is rough sand it and fill any knots.   I purchased smooth plywood so I was able to skip this step.

Cut your 1″by 2″ lumber.  Hubs cut the frame so that the long pieces fit on top of the short pieces.

The corner of a DIY wood sign in a farmhouse style. a pretty DIY Welcome Sign tutorial.


The long piece are the same length as the plywood 37″  the short pieces are 15.5″.  I suggestStain your plywood and 1″ by 2″ any dark colour you prefer.    Let dry.

Design the Wording

Make the page setting 12 by 36″ and turn the view so its easier to read.  The text for the word “Welcome” is Arial Unicode MS text with glyphs using size 72.  The wording “to our home” is  Cambria Math text using font size 238.

A screenshot of a DIY Welcome Sign pattern for a DIY farmhouse sign made using wood.

The first time I cut the design I did it in one piece like shown.  It was very difficult to transfer to the wood as the transfer paper kept sticking to itself.  To get around this divide the design into separate sections and line up the vinyl when your transferring the vinyl to the wood.  I cut the design into “Welc”, “ome”, and “to our home”.  It meant repeating  the process 3 separate times but the smaller pieces were so much easier to handle.

After your vinyl is cut place the transfer material on top.  Slowly peel the transfer paper off while applying the vinyl.  Repeat this for the other pieces.

Transferring vinyl on a DIY farmhouse styled welcome sign.

Rub the vinyl down making sure it is well secured.  Paint the entire surface of the plywood white.  Complete two coats letting dry well between coat.

Once dry slowly remove the vinyl revealing the espresso lettering underneath.

Build the Frame

Attach the frame to the front of your artwork using a nail gun or small 1 1/4″ nails from the back so they don’t show.

A fall decor idea including a large DIY Welcome Sign. A farmhouse saying sign using wood.

This sign is s larger than the purchased signs are. not to mention a fraction of the cost  It is fairly easy to make as long as you are patient and give the paint enough time to dry.

Enjoy the rest of the Farmhouse Hens DIY Farmhouse Wall art posts.    Would you consider making a larger farmhouse sign?  Let me know in the comments.

DIY Welcome Sign, DIY wood sign, farmhouse sign, farmhouse art

How To Make Faux Galvanized Metal From Chip Board by Michelle at Our Crafty Mom

Build a Frame out of Barn Wood by Tarah at Grandma’s House DIY

DIY Framed Farmhouse Sign by Denise at My Thrifty House

DIY Thrifted Plate Farmhouse Sign by Sam at Raggedy Bits


How to make a large welcome sign.

DIY Welcome Sign, DIY wood sign, farmhouse sign, farmhouse art

18 thoughts on “DIY Welcome Sign – Farmhouse Hens Decorate

    1. Hi Denise. I try making signs in different ways with the fancy glyphs on the word Welcome I found it easier to do with vinyl than try and paint the long fine swooshes.

    1. Hi Mary. I like the size of the sign and how it provides the backdrop for the vignette. It is one I will be using many times in the front foyer I am sure. Thank you for the feedback.

    1. Thank you very much Debra I wanted it to be welcoming as it should be the first thing you notice when you enter our home.

  1. Thank you Michelle. I really adore temporary artwork and when your swapping it out in different vignettes I absolutely could not afford to buy the large ones.

  2. I love the simplicity of it – both the look and the message. I also kind of envy you for having such a tastefully decorated and organized home. Some days I feel like I live in a bona fide war zone, lol. Happy if I get to clean the floors…

Leave a Reply

Your email address will not be published. Required fields are marked *

CommentLuv badge

This site uses Akismet to reduce spam. Learn how your comment data is processed.